Rational Design of a Necklace-like ZIF-67/Poly(vinylidene fluoride) Electrospun Nanofiber Hybrid Membrane for Simultaneous Removal of PM0.3 and SO2.

Growing concerns over poor air quality, especially in urban and industrial regions, have led to increased global demands for advanced air-purification technologies. However, the stability and airborne pollutant control abilities of the available air-purification materials under diverse environmental conditions are limited. Thus, the advanced development of filtration materials that can effectively control different types of pollutants, such as particulate matter (PM) and gaseous pollutants, simultaneously has attracted attention. The zeolitic imidazolate framework (ZIF), a type of porous metal-organic framework (MOF), is a promising material for capturing weakly acidic toxic gases such as SO2 owing to its excellent adsorption performance and high thermal and chemical stability. In this study, we successfully developed an ultrastable necklace-like multifunctional hybrid membrane via the cetyltrimethylammonium bromide-assisted in situ growth of zeolitic imidazolate framework (ZIF)-67 crystals on electrospun Co2+-doped poly(vinylidene fluoride) nanofibers (70 nm) that can be used in different moisture environments to achieve sustainable air-filtration performance. The hybrid nanocomposite membrane demonstrated excellent performance for the simultaneous control of intractable fine PM0.3 (filtration efficiency, 99.461%) and SO2 (adsorption capacity, 1476.5 mg g-1) under different humidity conditions. This study contributes to the optimal synergistic integration of the advanced metal-organic framework (MOF)-nanofiber nanocomposite membranes and can guide the rational design and conceptualization of a facile and novel membrane for various applications in the environmental science and energy fields.

Electrically Polarized Graphene-Blended Spacers for Organic Fouling Reduction in Forward Osmosis.

In membrane processes, a spacer is known to play a key role in the mitigation of membrane fouling. In this study, the effect of electric polarization on a graphene-blended polymer spacer (e.g., poly(lactic acid), PLA) for organic fouling on membrane surfaces was investigated. A pristine PLA spacer (P-S), a graphene-blended spacer (G-S), and an electrically polarized graphene-blended spacer (EG-S) were successfully fabricated by 3D printing. Organic fouling tests were conducted by the 5-h filtration of CaCl2 and a sodium alginate solution through commercially available membranes, which were placed together with the fabricated spacers. Membranes utilizing P-S, G-S, and EG-S were characterized in terms of the fouling amount on the membrane surface and fouling roughness. Electrostatic forces of EG-S provided 70% less and 90% smoother fouling on the membrane surface, leading to an only 14% less water flux reduction after 5 h of fouling. The importance of nanomaterial blending and polarization was successfully demonstrated herein.

Microplastics with adsorbed contaminants: Mechanisms and Treatment.

Plastic pollution has been a significant and widespread global issue, and the recent COVID-19 pandemic has been attributed to its worsening effect as plastics have been contaminated with the deadly infectious virus. Microplastics (MPs) may have played a role as a vector that carries hazardous microbes such as emerging bacterial threats (i.e. antibiotic resistant bacteria) and deadly viruses (e.g., coronavirus); this causes great concern over microplastics contaminated with emerging contaminants. Mitigation and treatment of MPs are challenging because of a range of factors including but not limited to physicochemical properties and composition of MPs and pH and salinity of the solution. Despite the heterogeneous nature of aquatic systems, research has overlooked interactions between contaminants and MPs under environmental conditions, degradation pathways of MPs with adsorbed contaminants, and, especially, the role of adsorbed contaminants in the efficiency of MP treatment through membrane filtration, in comparison with other treatment methods. This review aims to (1) analyze an assortment of factors that could influence the removal of MPs and mechanisms of contaminant adsorption on MPs, (2) identify mechanisms influencing membrane filtration of MPs, (3) examine the fate and transport of MPs with adsorbed contaminants, (4) evaluate membrane filtration of contaminant-adsorbing MPs in comparison to other treatment methods, and (5) draw conclusions and the future outlook based on a literature analysis.

Omni-Directional Protected Nanofiber Membranes by Surface Segregation of PDMS-Terminated Triblock Copolymer for High-Efficiency Oil/Water Emulsion Separation.

An excellent antifouling membrane with high permeate flux is required for oil/water emulsion separation due to ever-increasing oily industrial wastewater. Thus, an intriguing integration of the Omni-directional protected porous membrane that combines a high porosity nanofiber membrane with a surface segregation mechanism is established for the first time. By applying polydimethylsiloxane(PDMS)-terminated triblock copolymer, the enrichment of the hydrophilic poly(ethylene oxide) (PEO) segment and the nonpolar PDMS segment on the surface of the nanofiber endowed the nanofiber membrane with underwater oleophobicity and low oil adhesion force, exhibiting oil resistance as well as oil release property. An ultrahigh permeate flux of ∼7115 L m-2 h-1 with a separation efficiency of ∼97.88% is achieved under the driving force of gravity (∼0.9 kPa), which is the highest permeate flux ever reported under similar conditions. Moreover, the surface segregation nanofiber membrane shows excellent reusability and ultrahigh permeate flux with the assistance of stirring in a long-term test, revealing the promising performances for the further particular application of oily wastewater.

Capillary effect in Janus electrospun nanofiber membrane for oil/water emulsion separation.

Janus electrospun nanofiber membranes (J-ENMs) have attracted considerable interest as membranes for oil-in-water emulsion separation due to the opposite properties on each side of the membrane. Such properties can provide capillary effect and achieve water unidirectional transportation. However, the capillary effect on performances of the J-ENMs is still obscure. Therefore, it is highly important to investigate the relation of pore size, capillary pressure, and fluid flux of them. For this study, J-ENMs, which have a dual-layer structure with hydrophilic polyacrylonitrile (PAN) and hydrophobic polystyrene (PS) nanofibrous membranes simultaneously, were fabricated via the electrospinning process. Among the fabricated membranes, the large pore sizes of the PS layer of J-ENMs affected capillary pressure leading to a pure water flux increase of nine times that of the small pore size. For emulsion flux, oil droplets can pass through a large pore of the PS layer easily and can cause a decrease in emulsion flux. Nevertheless, the emulsion flux of J-ENMs was 1.7 times higher than that of single layer membrane, which showed a promising application for the oil/water separation field.